Monoprice Outdoor Speaker Volume Controller RMS 100W, White
About The So two 4‑ohm speakers wired in series is the same impedance as a single 8‑ohm speaker.If using a single pair of speakers rated at the same load level as your amplifier, you don't need to make any changes ‑ just leave the jumper in the default x1 position. However, if your speakers are of a different impedance level and/or you have more than one set of speakers in parallel, please refer to the following chart as a guide for setting the jumpers on the speaker volume control
This specially designed unit comes in a weatherproof, sealed enclosure specifically designed for outdoor installations. You've set up your outdoor sound system so that you can listen to music while you relax. What a hassle it is to go all the way back inside your house just to adjust the volume. Wouldn't it be easier to have a volume controller out in your patio?Here's your solution: an outdoor speaker volume controller. So two 4‑ohm speakers wired in series is the same impedance as a single 8‑ohm speaker. Impedance Correction ChartSpeakerImpedanceAmplifierRatingJumper Setting /# of Speaker Pairsx1x2x4x84‑ohm Speakers2 ohms2 pairs4 pairs8 pairs16 pairs4 ohms1 pair2 pairs4 pairs8 pairs8 ohmsn/a1 pair2 pairs4 pairs The rotary control can be set to one of twelve positions, including the minimum (off) and maximum volume settings.The water resistant enclosure also makes it perfect for marine (boating) applications.When setting up the speaker volume controls, it is important to match the impedance of your speaker system with the load rating of your amplifier. However, if your speakers are of a different impedance level and/or you have more than one set of speakers in parallel, please refer to the following chart as a guide for setting the jumpers on the speaker volume control.Note that for any speakers wired in series, the overall impedance level is the sum of each speaker. A simple rotary design allows you to set your audio to the perfect listening level. You're out in your yard enjoying your pool or BBQ. This is done by setting the jumpers on the volume control to compensate for the number of speakers you have in a parallel configuration and the impedance level of the speakers.If using a single pair of speakers rated at the same load level as your amplifier, you don't need to make any changes ‑ just leave the jumper in the default x1 position.
Adapters Switches & Splitters > Audio Adapters > Speaker Selectors & Volume Controllers
Monoprice Outdoor Speaker Volume Controller RMS 100W, White
Adapters Switches & Splitters > Audio Adapters > Speaker Selectors & Volume Controllers
Specifications of Monoprice Outdoor Speaker Volume Controller RMS 100W, White | |
|---|---|
| Category | Electronics > Audio > Audio Accessories > Speaker Accessories |
| Instock | instock |
